Why is my 'Infrared Thermometer' giving different readings?
Technical Help
1 month ago
Created 1 month ago
0 reply / 0 comment
Public discussion
Simran Singh
1 month ago
Surface temperature can be affected by sweat, hair, or distance. Aim at the center of the forehead and maintain the distance recommended (usually 1-3 cm).
0 Like
These discussions are related to your question:
How to clean a 'Suction Machine' tube?
Created by Neha Pandey (1 month ago)
After use, flush the tube by suctioning a mix of water and disinfectant (like CIDEX or diluted bleach). Discard single-use catheters immediately.
Technical Help
0
0
How to change the filter on a 'Nebulizer'?
Created by Mohammed Qureshi (1 month ago)
The small round filter usually turns gray or brown when dirty. Pop the cover, replace with a fresh filter, and ensure it's seated firmly.
Technical Help
0
0
How to check a 'Pulse' in an emergency?
Created by Michael Fernandes (1 month ago)
Place two fingers on the thumb-side of the wrist (Radial) or in the groove of the neck (Carotid). Count for 15 seconds and multiply by 4.
Technical Help
0
0
How do I use an 'AED' (Automated External Defibrillator)?
Created by Zoya Siddiqui (1 month ago)
Turn it on and follow the voice prompts. It will tell you exactly where to place the pads and will only deliver a shock if the machine detects it is necessary.
Technical Help
0
0
How to use a 'Pulse Oximeter' correctly?
Created by Aisha Khan (1 month ago)
Ensure the finger is warm and free of nail polish. Stay still and wait for the 'wave' (pleth) to become steady before reading the SpO2 percentage.
Technical Help
0
0
How to calibrate a 'Glucometer'?
Created by Riya Sharma (1 month ago)
Most modern meters are self-coding. However, you can use 'Control Solution' (provided by the manufacturer) to check if the strips and meter are reading accurately.
Technical Help
0
0
How to assemble a 'Manual Resuscitator' (Ambu Bag)?
Created by Sara Pathan (1 month ago)
Connect the mask to the one-way valve, attach the oxygen reservoir bag, and connect the oxygen tubing to the source. Test the bag by squeezing; it should reinflate quickly.
Technical Help
0
0
What is a 'Digital Thermometer' error 'L'?
Created by Pooja Bansal (1 month ago)
'L' usually means 'Low Temperature' (the room is cooler than body temp), not 'Low Battery.' It is ready to take a reading.
Technical Help
0
0
How to use a 'Blood Pressure Monitor' for an accurate reading?
Created by Krishna Verma (1 month ago)
Sit still for 5 minutes before. Keep your arm at heart level. Do not talk or cross your legs during the measurement.
Technical Help
0
0
